To meet the requirements of many industrial branches...
Our products are specially formulated to meet technical requirements and existing market
regulations for diverse applications
Gel Coat based on Iso / NPG resin of chemical and mechanical resistance,
Thixotropic and pre-accelerated product,
Gel Coat specially developed to resist against UV and yellowing, specially recommend for outside parts.
Available in all RAL colours,
Recommended for recreational vehicle industry,
Exists in L
ow viscosity version, Non-accelerated version,
T
op coat version and Promoted version,

Exists in Brush version under the reference SUNCOAT 901.
 Load technical data sheet (secure access)
GELCOAT 886 is formulated from polyester resin for spray application.
Gel Coat  886 is thixotropic and pre-accelerated.
It is filled and suitable for application which requires fire retardant classification.
Gel Coat  886 is available in brush version: GEL COAT 886 BRUSH.
Waxed version according to the reference TOP COAT 886 SPRAY.
Internal Release Agent according to the reference GD 886 SPRAY.

Certifications:
HL2-R1-R7 with NORESTER 880/2
OMI (Flooring) with NORESTER 880/2
BS2d0 with NORESTER 880/2

Colour tones available:
Contact the NORD COMPOSITES Technical Department. 
Shine & Aging inferior to a standard polyester gel coat.


 
 Load technical data sheet (secure access)
Gel Coat 886 BRUSH is formulated form polyester resin for brush application.
Gel Coat GP 886 is thixotropic and pre accelerated.
It is filled and suitable for application which requires fire retardant classification.
Gel Coat  886 BRUSH is availalble in spray version: GEL COAT 886 SPRAY.

 
Processus : Brush
 Load technical data sheet (secure access)
Isophtalic resin for RTM and infusion applications,
Pre accelerated and non thixotropic product,
Clear resin,
Low viscosity for a good wetting of reinforcements,
Exist in Low viscosity version, in different gel times,
No accelerated version and White.

 
 Load technical data sheet (secure access)
Orthophtalic resin for injection applications,
Thixotropic and pre accelerated product,
It is specially formulated for RTM to obtain pieces with good surface finish aspect by reducing the fiber tracks,
Low viscosity for a good flow of the resin in the mould and a good wetting of reinforcements,
Very good curing,
Available in all RAL coulour resin
,
Exist in LGT version under the reference NORESTER 710LGT.
 Load technical data sheet (secure access)
Orthophthalic resin for RTM and infusion application,
Non-accelerated and non-thixotropic product,
Resin without filler,
Low viscosity for a good wetting of reinforcements,
Exists in White or black, Pre-accelerated, Promoted and with release agent versions,
Exists in Filled version under the reference
NORESTER 878 Blanche
Classifications :     
                                             UTAC with GC 168

 
 Load technical data sheet (secure access)
NORESTER 11177 PAAC is an orthophtalic unsaturated polyester resin specially designed for RTM.
NORESTER 11177 PAAC is clear, no thixotropic and pre-accelerated.
The low visosity of NORESTER 11177 PAAC involves good fibre wetting and impregnation properties.
NORESTER 11177 PAAC has a limited exotherm despite a very good hardening.

Versions:
- Internal release agent according to the Reference NORESTER 11177 PAAC-D.
- No pre-accelerated according to the Reference NORESTER 11177 PAAC-10.
- Gel time at 25 minutes according to the Reference NORESTER 11177 PAAC A.
 
 Load technical data sheet (secure access)
Automotive body parts

         
©2015, Nord Composites. All rights reserved.    ♦    Legal information    ♦