Products

NORD CORE LIGHT 805 LV-06 is a thixotropic, pre-accelerated very light spray putty formulated with orthophtalic resin.
NORD CORE LIGHT 805 LV-06 allows improvement of the rigidity of polyester laminate, for replacement of Balsa and PU foams for reinforcements of complicated parts without shrinkage or deformation.
NORD CORE LIGHT 805 LV-06 has a very low exotherm peak and very low density for production of light sandwich structures.
NORD CORE LIGHT 805 LV-06 contains a blue indicator of catalyst ensuring the good distribution and mixing of the catalyst.
 

NORD CORE LIGHT 807 LV-06 (NCL 807) is thixotropic, pre-accelerated light sprayable putty formulated with orthophtalic resin.
NORD CORE LIGHT 807 LV-06 allows improvement of the rigidity of polyester laminate without shrinkage or deformation.
NORD CORE LIGHT 807 LV-06 reinforces PU foam systems which can be machined for mould production.
NORD CORE LIIGHT 807 LV-06 replaces the balsa and polyurethane foams for the reinforcements of complicated parts without distorsion and without shrinkage.
NORD CORE LIGHT 807 LV-06 has a very low density for production of light sandwich structures.
NORD CORE LIGHT 807 LV-06 can be machined; it is low exotherm peak without black pigment version of the NCL 809.

 

The NORD CORE LIGHT 809 GREY LV-06 (NCL 809) is thixotropic, pre-accelerated light sprayable putty formulated with orthophtalic resin.
The NORD CORE LIGHT 809 GREY LV-06 allows improvement of the rigidity of polyester laminate without shrinkage of deformation.
The NORD CORE LIGHT 809 GREY LV-06 reinforces PU foam systems which can be machined for mould production.
The NORD CORE LIGHT 809 GREY LV-06 replaces the balsa and polyurethane foams for the reinforcements of complicated parts without distorsion and without shrinkage.
The NORD CORE LIGHT 809 GREY LV-06 has a very low exotherm peak and low density for production of light sandwich structures.
The NORD CORE LIGHT 809 GREY LV-06 can be machined.
The NORD CORE LIGHT 809 GREY LV-06 is grey and antistatic in order to reduce dust formation when machining.