Products

Product description:
The resin NORESTER 6779 is a non-thixotropic and pre-accelerated polyester resin.
The resin NORESTER 6779 is recommended for a compatibility with the polystyrene.
The resin NORESTER 6779 allows to laminate on the polyester. It creates a barrier "skin coat" between a polyester block and the Nord Core Light 809 during the production of machinable models or standard resin for high thickness lamination. The minimum density of the polystyrene must be 25 kg/m3.

Versions:
No Thixotropic & Accelerated according to the reference NORESTER 6779 A.



 

NORD CORE LIGHT 805 LV-06 is a thixotropic, pre-accelerated very light spray putty formulated with orthophtalic resin.
NORD CORE LIGHT 805 LV-06 allows improvement of the rigidity of polyester laminate for replacement of Balsa and PU foams for reinforcements of complicated parts without shrinkage or deformation.
NORD CORE LIGHT 805 LV-06 has a very low exotherm peak and very low density for production of light sandwich structures.
NORD CORE LIGHT 805 LV-06 contains a blue indicator of catalyst ensuring the good distribution and mixing of the catalyst.
 

NORD APPRET POLYESTER 230 SPRAY is a thixotropic and accelerated sprayable polyester primer with low viscosity.
NORD APPRET POLYESTER 230 SPRAY is recommended for making models.
NORD APPRET POLYESTER 230 SPRAY has a good spreadability without run off and good filling properties.
NORD APPRET POLYESTER 230 SPRAY has good adhesion to models made from wood, sanded laminated polyester, Nord Core Light.

Versions:
- Spatula Version according to the reference NORD APPRET POLYESTER 231.

Colour tones available: White, Grey, Blue.


Sprayable polyester primer with low viscosity for the surfacing of plugs (models),
Thixotropic and pre-accelerated,
Fluid product with a good spreadability without run off.
It has good adhesion to plugs made from wood.
 

Product Description:
NORD LAQUE POLYESTER 210 SPRAY is a thixotropic and accelerated polyester lacquer. 
NORD LAQUE POLYESTER 210 SPRAY is recommended for finishing models.
NORD LAQUE POLYESTER 210 SPRAY has a very nice surface appearance and an excellent gloss.

Available colours:
White, Grey, Black.


 

Product description:
NORESTER 1050 is a polyester laminating resin, ready-to-use, specially recommended to produce moulds by hand lay up or spray application.
NORESTER 1050 is thixotropic, filled, accelerated and promotorised allowing the rapid production of moulds.
This resin NORESTER 1050 has very good fibre wetting and impregnation properties.
The resin NORESTER 1050 provides a good surface appearance, good hardening and lighter moulds with very good mechanical properties.

Versions:
- Thixotropic & Accelerated according to the reference NORESTER 1050 TA.

Viscosity & gel time versions available:
- NORESTER 1050 TA 25,
- NORESTER 1050 TA 45.




 

Main characterics:
Filled laminating resin  for mould making,
Pre-accelerated and promoted product,
Good mouldability, and fast wet out, glass to resin ratio: 1 / 2.
Lower tooling resin costs,
Standard catalyst type MEKP.

NORESTER 6842 TA 15 is an vinylester hybrid laminating resin specially recommended to be laminated behing our vinylester mould gel coat (206 & 207) or our gel coat for infusion parts, to obtain a good surface finish while avoiding marking. 
NORESTER 6842 TA 15 is a thixotropic and pre-accelerated resin.
NORESTER 6842 TA 15 has a very good mechanical properties and chemical resistances.
NORESTER 6842 TA 15 is recommended for the design of a skincoat.

Developed to be laminated behind GC 206 / 207 to obtain
a good surface finish without fiber patterning,
Exists in LGT version. according to the reference NORESTER 6842 TA 30.